6 extracted mass peaks, 7 calibration – INFICON HAPSITE ER Chemical Identification System User Manual
Page 401
12 - 5
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
Area . . . . . . . . . . . . . . . . . . . . . . . . . Displays the integrated analyte area quant
ion.
Standard . . . . . . . . . . . . . . . . . . . . . Designates the compound as an analyte or
an Internal Standard.
Conc . . . . . . . . . . . . . . . . . . . . . . . . Shows the concentration of the analyte or
Internal Standard in the displayed file.
NOTE: This field is not used if the
concentration flag is set to global.
IS Ref. . . . . . . . . . . . . . . . . . . . . . . . Displays the Internal Standard reference
number for analyte quantitation.
12.2.6 Extracted Mass Peaks
Displays the mass peaks and relative percentages for the selected analyte. See
Figure 12-3
.
Figure 12-3 Extracted Mass Peaks
12.2.7 Calibration
Displays the calibration curve and curve statistics for the selected analyte.