INFICON HAPSITE ER Chemical Identification System - Manual (Page 102)

3 - 18
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
2 When powered on or taken out of Extended Standby, the HAPSITE will
automatically start preparing an ER Survey and Analyze method if the probe is
attached. Refer to
Section Chapter 3, Operating HAPSITE in Portable Mode,
on page 3-1 .
3 Verify that the desired Analyze method is listed under the Survey method. In
Figure 3-30 , the Analyze method is ER_Air_Tri-Bed_PPB_Standard.
Figure 3-30 Analyze Method
4 A SYSTEM READY message will appear with a prompt to press Survey or
Analyze when the HAPSITE ER is ready to sample. See
Figure 3-31 .
Figure 3-31 System Ready