INFICON HAPSITE ER Chemical Identification System - Manual (Page 460)

15 - 8
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
15.5.1 The Service Module Tab in Properties Window
Figure 15-7 Service Module Tab in Properties Window
The following options are available:
Detach . . . . . . . . . . . . . . . . . . . . . . . Used to release the vacuum between the
Service Module and the HAPSITE before
physical removal. (Vacuum is maintained in
the Mass Spectrometer.)
Attach . . . . . . . . . . . . . . . . . . . . . . . Used to create the vacuum between the
HAPSITE and Service Module. It will create
and maintain vacuum within the Mass
Spectrometer after physically connecting.
Pump Down SM . . . . . . . . . . . . . . . Used to place the Service Module in storage.
Vent SM . . . . . . . . . . . . . . . . . . . . . . Used to take the Service Module out of
storage.