Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 181)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 183
Configuring the Ultra5000 Drive Chapter 4
The following commands can be executed in the Digital Outputs window of an
online drive.
Customize the Digital Outputs window for your Ultra5000 Drive by selecting
one or more of these commands:
• Click Show Status to display or hide the Status pane.
• Click Show Commands to display or hide the Commands pane.
• Click Setup to open the Monitor Setup window, where you can customize
the status display for this window.
• Click Revert to return parameter settings to the values they held when you
opened this window.
Command Description
Toggle Output 1 – 8 Changes the state of the selected digital output from ON to OFF,
or OFF to ON.
Turn All On Transitions all Output to ON.
Turn All Off Transitions all Output to OFF.