Rockwell Automation 2098-UWCPRG Ultraware Software User Manual User Manual
Page 193
![background image](/manuals/580375/193/background.png)
Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
195
Configuring the Ultra5000 Drive Chapter 4
The following status is displayed by default for an Ultra5000 drive in the
DeviceNet window.
No commands are associated with the DeviceNet window.
Customize the DeviceNet window for your Ultra5000 Drive by selecting one or
more of these commands:
•
Click Show Status to display or hide the Status pane.
•
Click Setup to open the Monitor Setup window, where you can customize
the status display for this window.
•
Click Revert to return parameter settings to the values they held when you
opened this window.
Status
Description
Fault Status
Indicates the last module’s fault status. This value defaults to
No Fault on powerup and reset.
The status are:
• No Fault
• Idle Fault
• Comm Fault
Loader Version
Indicates the current version of DNetLoad.exe
Server Version
Indicates the current version of DnetServ.exe