Current control panel window – Rockwell Automation 2098-UWCPRG Ultraware Software User Manual User Manual
Page 50
52
Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
Chapter 3 Configuring the Ultra3000 Drive
Current Control Panel Window
The Properties window for the Current Control Panel looks like this.
Use the Current Control Panel window to directly set the drive's current
command and monitor actual motor velocity or current. In support of these
functions, you can also:
•
zero the drive’s current,
•
enable or disable a drive, and monitor the drive's enabled or disabled status,
or
•
reset all drive faults.
The commands you execute override any motion commands originating from the
drive's normal operation mode, set in the Ultra3000 Drive window.
The Current Control Panel has these parameter, status, and direct commands:
ATTENTION: The Current Control Panel commands override the normal
operation mode. The motor moves in response to Current Control Panel
commands!
Parameter
Description
Current Command
The current, in Amperes, that is sent to the motor when the
Current Mode command executes, provided that the drive is
online and enabled.
Current Control Panel Window
The Properties window for the Current Control Panel looks like this.
Use the Current Control Panel window to directly set the drive's current
command and monitor actual motor velocity or current. In support of these
functions, you can also:
•
zero the drive’s current,
•
enable or disable a drive, and monitor the drive's enabled or disabled status,
or
•
reset all drive faults.
The commands you execute override any motion commands originating from the
drive's normal operation mode, set in the Ultra3000 Drive window.
The Current Control Panel has these parameter, status, and direct commands.
ATTENTION: The Current Control Panel commands override the normal
operation mode. The motor moves in response to Current Control Panel
commands!
Parameter
Description
Current Command
The current, in Amperes, that is sent to the motor when the
Current Mode command executes, provided that the drive is
online and enabled.