Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 24)

24 Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
Chapter 2 Common Commands for Ultra Drive Configuration
Opening Ultraware
Software Before you create a new offline drive, you must first create an Ultraware file to
contain the new drive. When Ultraware opens for the first time, a window similar
to the one below appears. Selecting any radio button causes the action described
below.
• Click Open Last File: <filename> and then click OK to open the most
recently used Ultraware file.
• Click Open existing file and then click OK. The Open window will
appear, and you can navigate to and open a previously saved Ultraware file.
• Click Create new file and then click OK to create a new, empty file.
• Click Cancel to exit the window without opening an Ultraware file.
The selected Ultraware file, if any, is displayed in an Off-Line branch of the
Workspace window.
TIP A new file is stored in temporary storage, and the Workspace icon
displays Unsaved until the file is saved with a filename.