Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 316)

318 Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
Chapter 6 Creating and Running Programs
Select All
Use this command to select all the text in the selected source (.c) or header (.h)
file. The Select All command is enabled only if a source or header file is selected in
the Client Area.
To execute the Select All command, perform these steps.
1. Select either a source or header file in the Client Area.
2. Either:
• Select All from the Edit menu.
• Simultaneously press the Ctrl + A keys.
All text in the text editor is highlighted. You can now execute the Edit
menu’s Cut, Copy and Delete commands.
Undo
Use this command to reverse the last command or delete the last entry you typed
in a header (.h) or source (.c) file in the Client Area. Ultraware software keeps up
to 2048 previous actions in memory.
This command is enabled only for selected source or header files with at least one
command or typing entry in memory.
To execute the Undo command, perform these steps.
1. Select a source or header file, for which Ultraware software has stored at
least one command or typing entry in its clipboard.
2. Do one of these:
• Click Undo in the Edit menu.
• Right-click the source or header file, and then click Undo from the pop-
up menu
• Click the Undo button, , in the Edit toolbar.
• Simultaneously press either the Ctrl + Z keys or the Alt + Backspace
keys
The previous text command is reversed: cut or deleted text reappears; typed text
disappears.