Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 185)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 187
Configuring the Ultra5000 Drive Chapter 4
The following status is displayed by default for an Analog Inputs branch of an
online drive.
Customize the Analog Outputs window for your Ultra5000 Drive by selecting
one or more of these commands:
• Click Show Status to display or hide the Status pane.
• Click Setup to open the Monitor Setup window, where you can customize
the status display for this window.
• Click Revert to return parameter settings to the values they held when you
opened this window.
Scale A value multiplied by the Output 1 (or 2) Input voltage value.
Offset A value added to the product of the Gain multiplied by the
Output 1 (or 2) Input voltage value.
Manual Value The voltage value input to the Analog Output when in Manual
mode, before the Scale and Offset values are applied.
Status Description
Output The Analog Output 1 (or 2) output voltage value after the Scaled
and Offset values are applied.
Parameter Description