Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 309)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 311
Creating and Running Programs Chapter 6
Select All
Use this command to select all the text in a header (.h) file. The Select All
command is enabled only if a header file is selected in the Client Area. To execute
the Select All command.
Select a header file in the Client Area, and then:
• click Select All in the Edit menu, or
• simultaneously press the Ctrl + A keys.
Go To Corresponding { } ( )
Use this command to find a corresponding brace or parenthesis. You can use this
command in the header (.h) file. The Corresponding {} () command is enabled
only if a header file is currently selected in the Client Area.
To execute the Corresponding {} () command: Click the header (.h) file to search
in the Client Area. Place the cursor before or after (or highlight) the curly brace
or parenthesis. Then do one of these actions:
• Click Go in the Edit menu and then click Corresponding {} () from the Go
To Popup menu.
• Simultaneously press the Alt + ] keys.
• Right-click to display the pop-up menu, click Go To, and then click
Corresponding {} ().
Direction The search direction beginning at the cursor. Select: Up to
search backward, toward the top of the file. Down to search
forward, toward the bottom of the file. Find Next Finds the next
occurrence of the selected text, in the specified Direction.
Displays a message box if the selected text is not found.
Replace Replaces the highlighted text in the header file with the text in
the “Replace With” field, then finds and highlights the next text
string that equals the text in the “Find What” field.
Replace All Replaces each occurrence of the text in the “Replace With” field
with the text in the “Find What” field.
Control (Continued) Description