Rockwell Automation 2098-UWCPRG Ultraware Software User Manual User Manual
Page 262
Advertising
264
Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
Chapter 5 Configuring the Kinetix 3 Drive
The following commands can be executed on an online drive using the Manual
Velocity Tuning window of the Tuning branch.
Customize the Manual Velocity Tuning window for your Kinetix 3 drive by
selecting one or more of these commands:
•
Click Show Status to display or hide the Status pane.
•
Click Show Commands to display or hide the Commands pane.
•
Click Revert to return parameter settings to the values they held when you
opened this window.
Command
Description
Start Tuning
Begins manual velocity tuning.
Stop Tuning
Stops manual velocity tuning.
Clear Faults
Attempts to clear all drive faults.
Advertising