Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 334)

336 Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
Chapter 7 Creating Custom Motors
The following command applies to the Linear Motor window.
Thermal:
Integral Thermostat: Check when motor has a built-in thermostat.
Software Protection: Check when thermal protection through software is desired.
Thermal Properties
Rth(w-e) 0.00001 to 32767.999 C/W winding-to-encoder thermal
resistance
Cth(w-e) 0.0039 to 8388607 W-s/C winding-to-encoder thermal
capacitance
Rth(w-a) 0.00001 to 32767.999 C/W winding-to-ambient thermal
resistance
Cth(w-a) 0.0039 to 8388607 W-s/C winding-to-ambient thermal
capacitance
Command Description
Close Closes the Linear Motor window with the parameters as
entered.
Parameter Description