Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 27)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 27
Common Commands for Ultra Drive Configuration Chapter 2
Saving an Ultraware File
To save all changes made to a drive or a project, perform these steps.
1. Choose one of these options.
• Click Save in the File menu
• Click the Save icon in the File toolbar
• Press the Ctrl + S keys
2. Click Save As in the File menu to open the Save As dialog box.
3. Type or click a file name in the Save As dialog box.
4. Navigate to the location where the new Ultraware file should be stored.
5. Click Save.
TIP Save As saves the entire Ultraware database (.udb) file to a
new name.