Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 37)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 39
Configuring the Ultra3000 Drive Chapter 3
Configuring Properties for the Ultra3000 Drive
To configure the properties for an Ultra3000 drive or one of its child branches,
perform these steps.
1. In the Workspace window, click the drive branch to configure.
2. Do one of these:
• Click Properties from the Edit menu.
• Right-click the drive in the Workspace, and click Export from the pop-
up menu.
• Double-click the drive branch.
A Properties window, such as the Drive Properties window displayed
below, appears for the selected drive branch.
TIP If the drive is a SERCOS drive, only those parameters, status and
direct commands appropriate for a SERCOS drive are displayed.