Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 273)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 275
Configuring the Kinetix 3 Drive Chapter 5
Understanding the Monitor
Window The Properties window for the Monitor looks like this.
The Monitor tool lets you display any combination of drive status settings for an
online Kinetix 3 drive. The Monitor tool is similar to the status pane of the
branch Properties window.
Use this window to:
• View a collection of statuses.
• Open the Monitor Setup window, where you can set the drive status to
display in this window.
• Load a monitor previously saved.
• Save a monitor for later use.
This window has these commands.
Command Description
Format The format for displaying integer values in the monitor:
• Decimal (The range is -2,147,483,647…2,147,483,647.)
• Hexadecimal, or
• Binary
Note: Do not create negative numbers in the Hexadecimal or
Binary format.
Load Opens the Monitor Load dialog, where you can program what is
displayed in the Monitor window.
Save Opens the Monitor Save dialog, where you can save a monitor.
Setup Opens the Monitor Setup window, where you can program the
drive status to display in the Monitor window.