Understanding the preset window – Rockwell Automation 2098-UWCPRG Ultraware Software User Manual User Manual
Page 60
Advertising
62
Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
Chapter 3 Configuring the Ultra3000 Drive
Understanding the Preset
Window
The Properties window for Presets looks like this.
Use the Preset window to configure:
•
up to eight preset velocity values
•
up to eight preset current values, and
•
up to eight preset position values.
Preset parameters control drive operation when the Operating Mode is set to
Preset Position, Preset Velocity or Preset Current, in the Ultra3000 Drive
window.
Note: Preset gearing parameters are set in the Follower window
The drive uses the preset position value, preset velocity value, or preset current
value selected by the Preset Select Lines 0, 1 and 2 as set in the Digital Inputs
properties window.
Advertising