Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 103)

Parameter Descriptions 11-1
C
HAPTER
11
Parameter Descriptions
The following information is provided for each parameter along with
its description:
What the Symbols Mean
The parameters are presented in numerical order. Appendix C
contains a list of parameters by name cross-referenced to
parameter number.
Parameter Number: Unique number assigned to each
parameter.
Parameter Name: Unique name assigned to each
parameter.
Range: Predefined parameter limits or
selections. Note that a negative Hz
value indicates reverse rotation.
Default: Factory default setting.
Access: Parameter access level.
0 = Basic (reduced parameter set)
1 = Standard (reduced parameter set)
2 = Advanced (full parameter set)
Path: Menu selections to reach specified
parameter. The path is indicated in this
manner: File>Group
See also: Associated parameters that may provide
additional or related information.
Symbol Meaning
32-bit parameter
Drive must be stopped before changing
parameter value.
32