Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 174)

11-72 SP600 AC Drive User Manual
Inputs that are presently issuing a valid stop command.
Indicates the source providing manual control and reference.
288 Stop Owner
Range: See figure 11.33
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also: 276 - 285
Figure 11.33 – Stop Owner
0 0 0 0 x 0 x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Issuing Command
0 =No Command
x =Reserved
Bit #
Terminal Blk DPI Port 1 DPI Port 2 DPI Port 3 Reserved DPI Port 5 Reserved
Nibble 1 Nibble 2 Nibble 3 Nibble 4
Source Location
Terminal Block Logic I/O
DPI Port 1 Local OIM
DPI Port 2 DIN port at base of drive
DPI Port 3 Split DIN port
DPI Port 5 (Network) Network option
298 Manual Owner
Range: See figure 11.34
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also:
Figure 11.34 – Manual Owner
0 0 0 0 x 0 x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 = Control is Enabled
0 = Control is Disabled
x =Reserved
Bit #
Factory Default Bit Values
Te
rminal Blk
Local OIM DPI P
or
t 2
DPI P
or
t 3
Reser
ve
d
Netw
or
k
Reser
ve
d
Nibble 1 Nibble 2 Nibble 3 Nibble 4