Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 236)

B-4 SP600 AC Drive User Manual
B.3.1 Key Descriptions
Table B.1 – Key Functions
Key Function
Scroll through options or user function keys,
move cursor to the left.
Scroll through options or user functions keys,
move cursor to the right.
Scroll through options, increase a value, or
toggle a bit. Increase speed when display is in
monitor mode.
Scroll through options, decrease a value, or
toggle a bit. Decrease speed when display is in
monitor mode.
Exit a menu, cancel a change to a parameter, or
toggle between program and process (user)
display screens.
Enter a menu, select an option, or save changes
to parameter value
Change motor direction if the OIM is the control
source.
Jog the drive if the OIM is the control source.
Stop the drive. Clear a fault if the OIM is the
control source.
Start the drive if the OIM is the control source.
F1 though F4: Predefined or user-configured
functions. The definition of each key is shown
directly above the key on the display. See item
➀
in figure B.3.
ESC/
PROG
JOG
F1