Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 98)

10-4 SP600 AC Drive User Manual
10.3.1 Selecting the Parameter Access Level
The SP600 AC drive provides three levels of access to the
parameters: Basic (0), Standard (1), and Advanced (2).
The Advanced level allows access to all of the parameters.
The Standard level allows access to a subset of the Advanced level
and is used for more sophisticated applications than the Basic level.
The Basic level allows access to a subset of the Standard level and
contains only the most commonly used parameters.
The active access level is displayed in Parameter Access Level
(196).
To select the parameter access level using the LCD OIM, select the
Password icon from the main menu. See figure 10.3.
This option is not supported in the VS Utilities software.
Figure 10.3 – Selecting the Parameter Access Level
Auto Stopped
Main Menu
Password
P0: SP600
Password:
Set Acc Lvl PW
Set Wrt Prot PW
Set Access Lvl
Highlight Password icon
Password:
Advanced
Standard
Select
Highlight option
Monitor Lang
>>
Basic