Rockwell Automation SP600 User Manual Version 3.0 User Manual
Page 176
11-74
SP600 AC Drive User Manual
.
Parameter number whose value will be written from a network
communications device data table.
Parameters that can only be changed while the drive is stopped
cannot be used as Datalink inputs. Entering a parameter of this type
will disable the link.
Refer to the appropriate communications option board manual for
Datalink information.
Parameter number whose value will be written from a network
communications device data table.
Parameters that can only be changed while the drive is stopped
cannot be used as Datalink inputs. Entering a parameter of this type
will disable the link.
Refer to the appropriate communications option board manual for
Datalink information.
Parameter number whose value will be written to a communications
device data table.
304
305
Data In C1 - Link C Word 1
Data In C2 - Link C Word 2
Range:
0 to 387 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also:
306
307
Data In D1 - Link D Word 1
Data In D2 - Link D Word 2
Range:
0 to 387 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also:
310
311
Data Out A1- Link A Word 1
Data Out A2 - Link A Word 2
Range:
0 to 387 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also: