Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 42)

3-6 SP600 AC Drive User Manual
3.1.3 Minimum Mounting Clearances
Be sure there is adequate clearance for air circulation around the
drive. For best air movement, do not mount SP600 AC drives
directly above each other. Note that no devices are to be mounted
behind the drive. This area must be kept clear of all control and
power wiring. See figure 3.3 for recommended air flow clearances.
Figure 3.3 – Minimum Mounting Clearances
101.6 mm
(4.0 in)
101.6 mm
(4.0 in)
50.8 mm
(2.0 in)
(with adhesive
label)
(without adhesive label)