Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 158)

11-56 SP600 AC Drive User Manual
1 = DynUsrSetSel: DynUsrSetSel (205) determines the active User
Set.
Controls which User Set is in memory when Ctrl Source (bit 1) of
DynUsrSetCnfg (204) is set to DynUsrSetSel.
Bit 0 - UserSetBit0
0 = Disabled
1 = Enabled
Bit 1 -UserSetBit1
0 = Disabled
1 =Enabled
Figure 11.16 – Dyn UserSet Cnfg
205 DynUsrSetSel
Range: See figure 11.17.
Default: See figure 11.17.
Access: 2 Path: Utility>Drive Memory
See also: 204, 206
0 x x 0 x x x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
Bit 0:
1 =Enabled
0 =Disabled
Bit 1:
1 = DynUsrSetSel
0 = Digital Inputs
x = Reserved
Bit #
Factory Default Bit Values
Dynamic Mode Ctr
l Source
Nibble 1 Nibble 2 Nibble 3 Nibble 4
Table 11.4 – Dynamic User Set Mode
UserSetBit1 UserSetBit0 UserSet Loaded in Memory
0 0 User Set 1
0 1 User Set 2
1 0 User Set 3
1 1 User Set 3