Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 167)

Parameter Descriptions 11-65
Captures and displays Drive Status bit pattern at the time of the last
fault.
See parameter 209 for bit descriptions.
Captures and displays Drive Status bit pattern at the time of last
fault.
See parameter 210 for bit descriptions.
227 Status 1 @ Fault
Range: See figure 11.25
Default: Read Only
Access: 2 Path: Utility>Diagnostics
See also: 209, 224-230
Figure 11.25 – Status 1 @ Fault (227)
0 1 1 0 0 0 0 1 0 1 1 1 0 0 0 0
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Condition True
0 =Condition False
x =Reserved
Bit #
Ready Activ
e
Command Dir Actual Dir Acceler
ating
Deceler
ating
Alar
m
Faulted At Speed Local ID 0 Local ID 1 Local ID 2 Spd Ref ID 0 Spd Ref ID 1 Spd Ref ID 2 Spd Ref ID 3
Nibble 1 Nibble 2 Nibble 3 Nibble 4
228 Status 2 @ Fault
Range: See figure 11.26
Default: Read Only
Access: 2 Path: Utility>Diagnostics
See also: 210, 224-230
Figure 11.26 – Status 2 @ Fault (228)
0 0 0 0 0 0 0 x 0 0 0 0 0 0 x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Condition True
0 =Condition False
x =Reserved
Bit #
Ready Active Running Jogging Stopping DC Braking AutoT
uning
AutoRst Ctdn AutoRst Act Curr Limit Bus Freq Reg Motor Overld DPI at 500 k
Nibble 1 Nibble 2 Nibble 3 Nibble 4