Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 31)

About the Drive 2-17
2.4 CE Conformity
Conformity with the Low Voltage (LV) Directive and Electromagnetic
Compatibility (EMC) Directive has been demonstrated using
harmonized European Norm (EN) standards published in the
Official Journal of the European Communities. The 400 volt class
SP600 AC drive complies with the EN standards listed below when
installed according to this User Manual.
CE Declarations of Conformity are available online at:
http://www.reliance.com/certification.
Low Voltage Directive (73/23/EEC)
• EN50178 Electronic equipment for use in power installations
• EN60204-1 Safety of machinery – Electrical equipment of
machines
EMC Directive (89/336/EEC)
• EN61800-3 (Second Environment) Adjustable-speed electrical
power drive systems Part 3: EMC product standard including
specific test methods
General Notes
To be CE-compliant, the motor cable should be kept as short as
possible in order to avoid electromagnetic emission as well as
capacitive currents.
AC drives may cause radio interference. The user is required to
take measures to prevent interference.
If the adhesive label is removed from the top of the drive, the drive
must be mounted in a cabinet with side openings less than 12.5 mm
(0.5 in) and top openings less than 1.0 mm (0.04 in) to maintain
compliance with the Low Directive.
Conformity with CE EMC requirements does not guarantee that the
entire machine or installation will comply with the requirements.
Use of line filters in ungrounded systems is not recommended.