Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 107)

Parameter Descriptions 11-5
The output frequency present at T1, T2, and T3 (U, V, and W). This
value includes reference, slip comp, and IR compensation.
The value of the active pre-ramp reference frequency command.
The total output current present at T1, T2, and T3 (U, V, and W),
which includes torque and flux components.
The amount of current that is in phase with the fundamental voltage
component. This is the torque-producing component of the output
current.
1 Output Freq
Range: +/-400.0 Hz [0.1 Hz]
Default: Read Only
Access: 0 Path: Monitor>Metering
See also:
2 Commanded Freq
Range: +/- 400.0 Hz [0.1 Hz]
Default: Read Only
Access: 0 Path: Monitor>Metering
See also:
3 Output Current
Range: 0.0 to Drive Rated Amps x 2 [0.1 Amps]
Default: Read Only
Access: 0 Path: Monitor>Metering
See also:
4 Torque Current
Range: Drive Rating x -2 to +2 [0.1 Amps]
Default: Read Only
Access: 1 Path: Monitor>Metering
See also: