Rockwell Automation Liqui-Flo DBT Reach Drive User Manual
Page 108
3-82
DBT Reach Drive User Manual
Standard Control = Parameters that can be changed only while the drive is stopped
cannot be used as Datalink inputs. Entering a parameter of this type will disable the
link
Vector Control = Will not be updated until drive is stopped.
Refer to the appropriate communications option board manual for datalink information.
Parameter number whose value will be written to a communications device data table.
Parameter number whose value will be written to a communications device data table.
Parameter number whose value will be written to a communications device data table.
Parameter number whose value will be written to a communications device data table.
310
311
Data Out A1- Link A Word 1
Data Out A2 - Link A Word 2
Range:
0 to 611 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also:
312
313
Data Out B1- Link B Word 1
Data Out B2 - Link B Word 2
Range:
0 to 611 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also:
314
315
Data Out C1- Link C Word 1
Data Out C2 - Link C Word 2
Range:
0 to 611 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also:
316
317
Data Out D1- Link D Word 1
Data Out D2 - Link D Word 2
Range:
0 to 611 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also: