642 gearbox rating, 643 gearbox sheave, 644 gearbox ratio – Rockwell Automation Liqui-Flo DBT Reach Drive User Manual
Page 149: 645 motor sheave
Parameter Descriptions
3-123
Sets the Gearbox ratio rating in K inch-lbs.
Example: A 912 gearbox is rated as 912,000 in-lbs. If the client enters in the value of
912, the calculations for the parameters should use a value of 912,000.
Displays the diameter of the Sheave on the Gearbox measured in inches.
Gear ratio taken directly off of the name plate information of the gearbox ratio. The
ratio is typically specified as X:1.
Sets the sheave diameter on the motor.
642
Gearbox Rating
Range:
16 to 2560 Kin lbs. [0.1 Kin Lb.]
Default:
640.0 Kin Lb.
Access:
2
Path: Applications>Oil Well Pump
See also:
643
Gearbox Sheave
Range:
0.25 to 100.00 inches [0.01 inch]
Default:
0.25 Inch
Access:
2
Path: Applications>Oil Well Pump
See also:
644
Gearbox Ratio
Range:
1.00 to 40.00 [0.01]
Default:
1.00
Access:
2
Path: Applications>Oil Well Pump
See also:
645
Motor Sheave
Range:
0.25 to 25.00 Inches [0.01]
Default:
10.00
Access:
2
Path: Applications>Oil Well Pump
See also: