Rockwell Automation Liqui-Flo DBT Reach Drive - Manual (Page 213)

HIM Overview C-7
Table A.8 – View and Editing Parameterts
Step Key(s) Example Displays
1. In the Main Menu,
press the Up Arrow or
Down Arrow to scroll
to “Parameter.”
2. Press Enter. “FGP
File” appears on the
top line and the first
three files appear
below it.
3. Press the Up Arrow
or Down Arrow to
scroll through the
files.
4. Press Enter to select
a file. The groups in
the file are displayed
under it.
5. Repeat steps 3 and 4
to select a group and
then a parameter.
The parameter value
screen will appear.
6. Press Enter to edit
the parameter.
7. Press the Up Arrow
or Down Arrow to
change the value. If
desired, press Sel to
move from digit to
digit, letter to letter, or
bit to bit. The digit or
bit that you can
change will be
highlighted.
8. Press Enter to save
the value. If you want
to cancel a change,
press Esc.
9. Press the Up Arrow
or Down Arrow to
scroll through the
parameters in the
group, or press Esc
to return to the group
list.
Sel
Esc
or
or
or
or
F GP: File
Monitor
Motor Control
Speed Reference
FGP: Par 55
Maximum Freq
60.00 Hz
25 <> 400.00
FGP: Par 55
Maximum Freq
90.00 Hz
25 <> 400.00
F G P: Group
Motor Data
Torq Attributes
Volts per Hertz
FG P : Parameter
Maximum Voltage
Maximum Freq
Compensation