Parameters -2, 1 parameters, 1output freq – Rockwell Automation Liqui-Flo DBT Reach Drive User Manual
Page 28: 2commanded speed, 3output current, 4torque current, 5flux current
3-2
DBT Reach Drive User Manual
3.1
Parameters
The output frequency present at T1, T2, and T3 (U, V, and W).
The value of the active Speed/Frequency Reference. Displayed in Hz or RPM,
depending on value of Speed Units (79).
The total output current present at T1, T2, and T3 (U, V, and W).
The amount of current that is in phase with the fundamental voltage component.
The amount of current that is out of phase with the fundamental voltage component.
1
Output Freq
Range:
+/-400.0 Hz [0.1 Hz]
Default:
Read Only
Access:
0
Path: Monitor>Metering
See also:
2
Commanded Speed
Range:
+/- [P.082 Maximum Speed] [0.1 Hz or 0.1 RPM]
Default:
Read Only
Access:
0
Path: Monitor>Metering
See also:
79
3
Output Current
Range:
0.0 to Drive Rated Amps x 2 [0.1 A]
Default:
Read Only
Access:
0
Path: Monitor>Metering
See also:
4
Torque Current
Range:
Drive Rating x -2/+2 [0.1 A]
Default:
Read Only
Access:
1
Path: Monitor>Metering
See also:
5
Flux Current
Range:
Drive Rating x -2/+2 [0.1 A]
Default:
Read Only
Access:
1
Path: Monitor>Metering
See also: