Rockwell Automation Liqui-Flo DBT Reach Drive - Manual (Page 52)

3-26 DBT Reach Drive User Manual
Sets the output frequency of the drive when Jog Speed 2 is selected.
Adds or subtracts a percentage of the speed reference or maximum speed.
Dependent on the setting of Trim Out Select (118).
Table 3.1 – Default Values for Preset Speeds 1-7
Parameter No. Parameter Name Default Access
101 Preset Speed 1 5.0 Hz or 150 RPM 0
102 Preset Speed 2 10.0 Hz or 300 RPM 2
103 Preset Speed 3 20.0 Hz or 600 RPM 2
104 Preset Speed 4 30.0 Hz or 900 RPM 2
105 Preset Speed 5 40.0 Hz or 1200 RPM 2
106 Preset Speed 6 50.0 Hz or 1500 RPM 2
107 Preset Speed 7 60.0 Hz or 1800 RPM 2
108 Jog Speed 2
Range: -/+ Maximum Speed [0.1 Hz or 0.1 RPM]
Default: 10.0 Hz or 300.0 RPM
Access: 0 Path: Speed Command>Discrete Speeds
See also:
116 Trim % Setpoint
Range: -/+ 200.0% [0.1 %]
Default: 0.0%
Access: 2 Path: Speed Command>Speed Trim
See also: 118