Rockwell Automation Liqui-Flo DBT Reach Drive - Manual (Page 181)

Troubleshooting 4-1
C
HAPTER
4
Troubleshooting
Chapter 4 provides information to guide you in troubleshooting the Reach Drive.
Included is a listing and description of drive faults (with possible solutions, when
applicable) and alarms.
Important: You can only troubleshoot the Reach Drive with an HIM or Drive Explorer.
Refer to Appendix C for more information.
The Reach Drive drive provides the following ways to determine the status of the drive
and to troubleshoot problems that may occur:
• User-configurable and non-configurable alarms
• User-configurable and non-configurable faults
• Entries in the fault queue
• Drive status parameters
!
ATTENTION: Only qualified electrical personnel familiar with the
construction and operation of this equipment and the hazards involved
should install, adjust, operate, or service this equipment. Read and
understand this manual and other applicable manuals in their entirety
before proceeding. Failure to observe this precaution could result in
severe bodily injury or loss of life.