6output voltage, 7output power, 8output powr fctr – Rockwell Automation Liqui-Flo DBT Reach Drive User Manual
Page 29: 9elapsed mwh, 10 elapsed run time
Parameter Descriptions
3-3
The output voltage present at terminals T1, T2, and T3 (U, V, and W).
The output power present at T1, T2, and T3 (U, V, and W).
The output power factor.
The accumulated output energy of the drive.
The accumulated time the drive has been outputting power.
6
Output Voltage
Range:
0.0 to Drive Rated Volts [0.1 VAC]
Default:
Read Only
Access:
0
Path: Monitor>Metering
See also:
7
Output Power
Range:
0 to Drive Rated kW x 2 [0.1 kW]
Default:
Read Only
Access:
0
Path: Monitor>Metering
See also:
8
Output Powr Fctr
Range:
0.00 to 1.00 [0.01]
Default:
Read Only
Access:
2
Path: Monitor>Metering
See also:
9
Elapsed MWh
Range:
0.0 to 214,748,352.0 MWh [0.1 MWh]
Default:
Read Only
Access:
2
Path: Monitor>Metering
See also:
10
Elapsed Run Time
Range:
0.0 to 214,748,352.0 Hr [0.1 Hr]
Default:
Read Only
Access:
1
Path: Monitor>Metering
See also: