Rockwell Automation Liqui-Flo DBT Reach Drive - Manual (Page 95)

Parameter Descriptions 3-69
Elapsed hours since initial drive power up. This value will rollover to 0 after the drive
has been powered on for more than the maximum value shown.
A code that represents a drive fault. The codes will appear in these parameters in the
order they occur. Fault 1 Code = the most recent fault.
The time between initial power up and the occurrence of the associated trip fault. Can
be compared to Power Up Marker for the time from the most recent power up.
Fault x Time - Power Up Marker = Time difference to the most recent power up. A
negative value indicates a fault occurred before the most recent power up. A positive
value indicates a fault occurred after the most recent power up.
242 Power Up Marker
Range: 0.0000 to 214748.3647 Hr [0.0001 Hr]
Default: Read Only
Access: 2 Path: Utility>Faults
See also: 244, 246, 248, 250, 252, 254, 256, 258
243
245
247
249
251
253
255
257 Fault 1 Code
Fault 2 Code
Fault 3 Code
Fault 4 Code
Fault 5 Code
Fault 6 Code
Fault 7 Code
Fault 8 Code
Range: 0000 to 65535
Default: Read Only
Access: 2 Path: Utility>Faults
See also:
244
246
248
250
252
254
256
258 Fault 1 Time
Fault 2 Time
Fault 3 Time
Fault 4 Time
Fault 5 Time
Fault 6 Time
Fault 7 Time
Fault 8 Time
Range: 0.0000 to 214748.3647 [0.0001 Hr]
Default: Read Only
Access: 2 Path: Utility>Faults
See also: 242