Regional map widget – H3C Technologies H3C Intelligent Management Center User Manual
Page 123
109
The popup list appears.
c.
Click
Configuration in the popup list.
The view configuration window appears.
2.
Drag the Device Details widget from the widget area to the panel.
3.
Right-click the Device Details widget and then select Parameter Configuration from the shortcut
menu.
The Parameter Configuration window appears.
4.
Filter devices by label or IP address:
a.
Enter a partial or full device label or IP address in the text box.
b.
Select Device.
c.
Click Search.
The results of your filter or search display in the device list.
If you do not set the criterion, the device list displays all devices in IMC.
5.
Select a device from the filter results:
•
To add a device to the Selected Objects list, select the device in the device list and click
.
•
To add all searched devices to the Selected Objects list, click
. You can select only one
device. If you select more than one device, the Bind button is grayed out.
•
To remove a device from the Selected Objects list, select the device in the Selected Objects list and
click .
•
To remove all devices from the Selected Objects list, click
.
6.
Click Bind.
7.
Click Save Configuration .
Regional Map widget
Figure 77 Widget icon
The Regional Map widget displays the alarm status of core or important devices bound to each region
on the map. By default, the PRC map is used. As shown in
, the color of each region on the map
represents the highest severity level of the core or important devices on the region.