H3C Technologies H3C Intelligent Management Center - Manual (Page 430)

416
You can delete the unneeded IP segment by clicking Delete after selecting.
10. Click OK, and go to Step 12
The Idle IP Detection Results page displays idle IP addresses and idle days that match the criteria.
11. The Idle IP Detection Results page displays idle IP addresses.
To detect idle IP addresses again, click Cancel and modify the idle detection conditions on the Idle
IP Detection Condition Settings page.
12. Select the check boxes next to the IP addresses you want to release, and then click Restore.
Unauthorized access
The Unauthorized Access provides you with the ability to view the terminals that did not comply with the
access policies, the unauthorized access logs, and how they were handled by IMC.
Viewing unauthorized access list
The Unauthorized Access List shows you the terminals that did not comply with the access policies.
To view the Unauthorized Access List:
1. Navigate to Resource > Unauthorized Access.
2. Click the Resource tab from the tabular navigation system on the top.
3. Click the Terminal Access section of the navigation tree on the left.
4. Click Unauthorized Access under Terminal Access from the navigation tree on the left.
The Unauthorized Access List is displayed in the main portion of the Unauthorized Access page.
Unauthorized access list
• Terminal MAC: Contains the MAC address of the unauthorized access terminal.
• Terminal Name: Contains the name of the unauthorized access terminal. If a DNS server is
configured in IMC system settings, IMC resolves the domain name of the terminal by using the DNS
server. For more information about configuring DNS server, see "
System settings ." If the IMC cannot
retrieve the terminal domain name from the DNS server and the IMC is configured with a DHCP
server, the IMC retrieves the terminal domain name from the DHCP server. For more information
about configuring the DHCP server, see H3C IMC Deployment Guides.
• Terminal IP: Contains the IP address of the unauthorized access terminal.
• Device Label: Contains the IMC name for the device, which, by default, is the name assigned to it
in its device configuration.
• Device IP: Contains the IP address of the access device.
• Interface Description: Contains the description of the interface connected to the terminal.
• Status: Contains the process status.
• Unauthorized Access Log: Contains a link for navigating to the Unauthorized Access Log List page
of the current terminal.
If the Unauthorized Access List contains enough entries, the following navigational aids are
displayed:
{
Click to page forward in the Unauthorized Access List.
{
Click to page forward to the end of the Unauthorized Access List.
{
Click to page backward in the Unauthorized Access List.