H3C Technologies H3C Intelligent Management Center User Manual
Page 861
847
1.
Navigate to ACL Resource:
a.
Click the Service tab from the tabular navigation system on the top.
b.
Click ACL Management section of the navigation tree on the left.
c.
Click the ACL Resource link located under ACL Management on the navigation tree on the left.
The ACL Resource list displays in the main pane of the ACL Resource page.
2.
Click the ACL Identifier for the basic ACL for which you want to modify a rule. Refer to the ACL Type
field in the ACL Resource list for identifying ACLs for which the type is Basic.
The Rule Set List for the selected ACL displays in the main pane of the ACL Resource > <ACL
Resource Name (ACL Identifier)> page.
3.
Click the icon in the Modify field associated with the rule set you want to modify.
The Basic Info step of the Modify Rule Set page appears.
Several fields cannot be changed. These include the ACL Identifier, the ACL Type, the ACL Resource
Name, the Rule Set Name, and the Match Order.
4.
Modify the description for this ACL as needed in the ACL Description field.
A valid length for this field is 0 – 127 characters.
5.
Modify the description for this rule set as needed in the Rule Set Description field.
A valid length for this field is 0 – 127 characters.
6.
Click Next. The Configure Time Range step of the Modify Rule Set page appears.
7.
If you do not want to modify or add a time range, click Next and skip to Step 8.
•
To modify an existing time range, click the icon in the Modify field of the time range table, the
Modify Time Range page is displayed. Modification options include adding new time ranges or
deleting existing time ranges, or
•
To modify the time range name, enter a new name for the time range in the Name field of the
Modify Time Range page. Time Range names must begin with a letter [A-Z] and consist of 1-32
characters. Blank spaces [ ] and question marks [?] are not permitted. Uppercase letters may be
converted to lowercase letters by some devices after deployment, or
•
To configure a new time range item, click Add under the Time Range Items section and follow the
instructions below.
The Add Time Range dialog box appears.
8.
Select the type of time range you want to create by clicking the radio button to the left of the
desired time range type:
•
Fixed to identify a specific and finite start and end date and time, or
•
Cyclic for the time range to recur for selected days of the week.
9.
Do one of the following:
{
To add a new rule click Add on the Configure Rule page to configure a new rule, or
The Add Rule page appears.
{
To modify an existing rule, click on the icon in the Modify field associated with the rule you
want to modify.
10.
Select the action you want to take by clicking the radio button to the left of the option you want
to apply to this rule:
{
Select permit if, upon matching the specified conditions, the packet should be forwarded.
{
Select deny if, upon matching the specified conditions, the packet should be discarded.