Ssh settings, Check access settings, Poll interval settings – H3C Technologies H3C Intelligent Management Center User Manual
Page 416
402
SSH settings
You can also easily and quickly access IMC batch operations for configuring SSH settings directly from
the Device List.
To configure IMC SSH settings for devices from the Device List using batch operations:
1.
Navigate to a Device List that contains the devices that you want to configure SSH settings for.
For information on navigating to a Device List, see "
."
2.
Click the checkbox to the left of the devices you want to manage the SSH settings for from the
selected view's Device List.
3.
Click More.
4.
Select SSH Settings from the list.
The Resource > Batch Operation > SSH Settings page appears.
5.
Configure and apply the SSH Settings for batch mode operation.
For information on using Batch Operations to configure SSH settings on multiple devices, see
"
Using batch mode to configure SSH settings
Check Access settings
You can also check SNMP settings, Telnet settings and SSH settings on managed devices using IMC
batch operations feature accessed from the Device List.
To check IMC access settings for devices from the Device List using batch operations:
1.
Navigate to a Device List that contains the devices that you want to check access settings for.
For information on navigating to a Device List, see "
."
2.
Click the checkbox to the left of the devices you want to manage the access settings for from the
selected view's Device List.
3.
Click More.
4.
Select Check Access Settings from the list.
The Resource > Batch Operation > Check Access Settings page appears.
5.
Configure and apply the Check Access Settings for batch mode operation.
For information on using Batch Operations to configure access settings on multiple devices, see
""
Using batch mode to create a plan to check access settings
."
Poll interval settings
You can also modify configuration and status poll settings on managed devices using IMC batch
operations feature accessed from the Device List.
To configure IMC configuration and status poll settings for devices from the Device List using batch
operations:
1.
Navigate to a Device List that contains the devices that you want to configure configuration and
status polling settings for.
For information on navigating to a Device List, see "
."
2.
Click the checkbox to the left of the devices you want to manage the poll configurations for from
the selected view's Device List.
3.
Click More.
4.
Select Poll Interval Settings from the list.
The Resource > Batch Operation > Poll Interval page appears.