H3C Technologies H3C Intelligent Management Center - Manual (Page 453)

439
The Audit History section of the Network Asset Details page provides you with a list of all asset
audits performed on the selected device.
3. To access the Audit History list, click the Audit History link in the upper right corner of Network
Asset Details page.
Asset audit list
• Audit Time: Contains a date and time stamp for the entry in the Audit History list.
• Device Label: Contains the IMC name for the devices, which by default, is the name assigned to it
in its device configuration. This field also contains the IP address. The device label serves as an
active link for drilling down into the Device Details page, which offers you convenient access to
device management features.
• Asset Class: Contains the asset classification for the device.
• Asset Name: Contains the asset name. At the device level, the asset name is derived from the device
label in IMC. IMC populates the device label value with the sysName if it has been configured on
the device and if the operator has not manually changed the device label in IMC.
• Audit Options: Contains type of audit action performed. Possible audit actions include: add asset,
modify firmware version, modify alias, delete asset, modify software version, modify asset ID,
modify asset name, modify serial number, modify build information, modify hardware version, and
modify model name.
• Before Change: Contains a description of the asset prior to the change.
• After Change: Contains a description of the asset after the change.
If the Audit History list contains enough entries, the following navigational aids are displayed:
{
Click to page forward in the Audit History List.
{
Click to page forward to the end of the Audit History List.
{
Click to page backward in the Audit History List.
{
Click to page backward to the front of the Audit History List.
4. Click 8, 15, 50, 100, or 200 from the right side of the main pane to configure how many items per
page you want to view.
5. For Audit History lists that have more than one page, click on 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 … from
the bottom right side of the main pane to jump to a particular page of the list.
Viewing interface list
The Interface section of the Network Asset Details page provides you with a list of interfaces on the
selected device.
To access the Interface List, click the Interface List link below the Device Information section of the
Network Asset Details page.
Network asset query
You can query the Network Asset List for audit records for specific devices. You have two options for
querying: a basic query and an advanced query. The following sections provide information on each of
these query methods.
Basic query
To perform a basic query:
1. Navigate to Resource > Network Assets.