H3C Technologies H3C Intelligent Management Center - Manual (Page 847)

833
The Rule Info page displays in the main pane of the ACL Resource > <ACL Resource Name (ACL
Identifier)> > <Rule Set Name> > View Advanced Rule page.
The Basic Info field names and explanations include:
{
Protocol: Contains the protocol specified in the associated rule for which the action to be taken.
If the Protocol is TCP or UDP, the Advanced Settings field displays below the Basic Info field.
{
Action: Contains the access control action specified in the associated rule. Actions include
permit and deny.
{
Time Range: Contains the time range specified for this rule.
{
Source Address: Contains the source address specified in the associated rule for which the
action to be taken. For example, if the action is to permit IP traffic, this field identifies the source
IP address from which IP traffic is permitted.
{
Destination Address: Contains the destination address specified in the associated rule for which
the action to be taken. For example, if the action is to permit IP traffic, this field identifies the
destination IP address to which IP traffic is permitted.
{
The Advanced Settings field names and explanations include:
{
Source Port: Contains the source port specified in the associated rule for which the action to be
taken.
{
Destination Port: Contains the destination port specified in the associated rule for which the
action to be taken.
{
The Other Settings field names and explanations include:
{
IP Priority: Contains the IP priority setting for this rule.
{
ToS Value: Contains the type of service setting for this rule.
{
DSCP Value: Contains the differentiated control services protocol value for this rule.
{
Fragment: Identifies whether or not the rule is configured to apply to all fragments (Yes) or to
apply to first fragments (No).
{
Logging: Identifies whether or not logging is enabled.
{
VPN Instance: Identifies the VPN instance name for the VPN instance to which this rule is
applied. The VPN-instance-name argument takes a case sensitive string of 0-31 characters. If no
VPN is specified, the rule applies only to non-VPN packets.
Rule info page for link ACL
The Rule Info page displays in the main pane of the ACL Resource > <ACL Resource Name (ACL
Identifier)> > <Rule Set Name> > View Link Rule page.
The Basic Info field names and explanations include:
• Protocol: Contains the protocol specified in the associated rule for which the action is taken. If the
Protocol is TCP or UDP, the Advanced Settings field appears below the Basic Info field.
{
Action: Contains the access control action specified in the associated rule. Actions include
permit and deny.
{
Time Range: Contains the time range specified for this rule.
{
Source MAC Addr: Contains the source MAC address specified in the associated rule for which
the action is taken.
{
Destination MAC Addr: This field contains the destination MAC address specified in the
associated rule for which the action is taken.
{
The Other Settings field names and explanations include: