H3C Technologies H3C Intelligent Management Center User Manual
Page 677
663
{
You can also use the query function located at the top of the Select Trap dialog box to locate the
trap you want to add.
23.
Enter one or more of the following search criteria:
{
Trap Name: Enter the object name for the trap you want to locate in the Trap Name field.
{
Trap OID: Enter the Object ID for the trap in the Trap OID field.
{
Enterprise Name: Enter a partial or complete name for the Enterprise MIB you want to locate in
the Enterprise Name field.
{
Enterprise OID: Enter a partial or complete Enterprise ID for the MIB you want to locate in the
Enterprise OID field.
24.
Click Query to submit your search criteria.
The results of your query display in the dialog box.
25.
Click Reset to clear your query criteria and to restore the full list of MIBs and traps.
26.
Click on the checkbox to select the trap that you want to include in this rule.
27.
Click OK.
It can take a while for the Select Trap dialog box to close. When it does, it updates the Trap Name
field with the modified traps.
28.
To delete any of the existing traps, highlight the traps you want to delete and click on the Delete
button located to the right of the Trap Name field.
29.
Modify the trap parameter settings by clicking on the Parameter Settings to the right of the Trap
Name field.
30.
Add any values to the variables displayed in the Set Alarm Parameters dialog box.
31.
Click OK.
These parameters vary based on the trap you have selected in the Trap Name field.
32.
Click the Delete button if you want to remove the parameter from the parameter settings
configuration. By deleting a parameter, you are removing it from IMC evaluation of the trap for
alarming purposes.
33.
Click the checkbox to the left of Time Range if you want to define when this trap to alarm rule
generates alarms.
34.
Select the period of time to which this trap to alarm rule applies from the Validity Period
Configuration list.
35.
Select Weekly if you want to define the days of the week and the hourly range.
36.
Do one of the following:
{
Click the checkbox next to the day of the week in which you want to apply this trap to alarm
rule.
{
Click a checked box to remove the rule for that day.
37.
Select By Time Range if you want to set a specific date and time range for this trap to alarm rule.
38.
If you selected By Time Range, enter:
{
Start Date: You can auto populate this field by clicking the field located to the right. A popup
calendar appears. Select the start date from the calendar.
{
End Date: You can auto populate this field by clicking the field located to the right. A popup
calendar appears. Select the start date from the calendar.
39.
Enter the Start Time for every day in which you have applied this trap to alarm rule.
40.
Enter the Start Time and End Time for every day in which you have applied this trap to alarm rule.