H3C Technologies H3C Intelligent Management Center - Manual (Page 985)

971
Details for all ports for the selected device display in the Trunk Port List.
Trunk port
• Port Status: Contains the current status for the associated port.
• Port Name: Contains the port name.
• PVID: Contains the default VLAN ID of this trunk port.
• Allowed VLAN: Contains the list of VLANs permitted for this trunk port.
• Modify: Contains a link for modifying the associated trunk port.
If the Trunk Port List contains multiple entries, the following navigational aids may appear:
{
Click to page forward in the Trunk Port List.
{
Click to page forward to the end of the Trunk Port List.
{
Click to page backward in the Trunk Port List.
{
Click to page backward to the front of the Trunk Port List.
4. Click 8, 15, 50, 100, or 200 from the right side of the main pane to configure how many items per
page you want to view.
5. For Port Trunk Lists that have more than one page, click on 1, 2, 3, 4, 5, 6, 7, 8, 9, 10… from the
bottom right side of the main pane to jump to a particular page of the list.
You can sort the Port Trunk List by the Port Status, Port Name, PVID, and Allowed VLAN fields by
clicking the column label to sort the list by the selected field. The column label is a toggle switch
that allows you to toggle between the various sort options specific to each field.
Adding a trunk
To add a trunk port to a VLAN:
1. Navigate to VLAN Management > VLAN Devices > Device Name:
a. Click the Service tab from the tabular navigation system on the top.
b. Click the VLAN Management on the navigation tree on the left.
c. Click VLAN Devices link located under VLAN Management on the navigation tree on the left.
The Device VLAN List appears.
2. Click the VLAN Configuration link associated with the device to which you want to view trunk
ports for.
3. Click the Trunk Port tab.
Details for all ports for the selected device display in the Trunk Port List.
4. Click Add.
5. Select the port to be used for the trunk port from the Port Name list.
6. Enter the port VLAN ID for the trunk port in the PVID field.
7. Enter the permitted VLAN IDs for the trunk port in the Allowed VLAN field.
8. Click OK.
9. View the results of this task in the Trunk Port List.
Modifying a trunk
To modify an existing trunk port:
1. Navigate to VLAN Management > VLAN Devices > Device Name: