H3C Technologies H3C Intelligent Management Center User Manual
Page 647
633
•
Device Name: Contains the name of the device.
•
Description: Contains the detailed information about the violations of the device and number of
violations for each violation severity level. You can click a rule name link to enter the Rule Content
window and click the checked content link to enter the Check Content window.
4.
Do one of the following:
{
To clasp the compliance policy, click to the left of the device name.
{
To expand the compliance policy, click .
If the Device Check Information List contains enough entries, the following navigational aids are
displayed:
{
Click
to page forward in the Device Check Information List.
{
Click
to page forward to the end of the Device Check Information List.
{
Click
to page backward in the Device Check Information List.
{
Click
to page backward to the front of the Device Check Information List.
5.
Select 8, 15, or 50 from the right side of the main pane to configure how many items per page you
want to view.
6.
Click the upper left corner to return to the Task Execution Results page.
Compliance policy check information
•
Policy Name: Contains the name of the compliance policy. To enter the compliance policy check
result page, click the target compliance policy.
•
Total Devices: Contains the number of devices that violate the compliance policy.
•
Violating Devices: Contains the name of each device that violates the compliance policy. To enter
the Device Violating Results page, click the target device.
7.
Click the target compliance policy to enter the Compliance Policy Check Results page.
The check task information is displayed on the upper left part of the report.
•
Task Name: Contains the name of the check task.
•
Check Time: Contains the time when the device violated the compliance policy.
•
Task Description: Contains the description on the check task.
The Compliance Policy Check Information area displays the detailed information about compliance
policy violation by compliance policy:
•
Compliance Policy Name: Contains the name of the compliance policy.
•
Rules: Contains the number of rules contained in the compliance policy.
•
Check Result: Contains the violation status of the device associated with the compliance policy.
means the device does not violate the compliance policy.
means the device violated the
compliance policy.
•
Violations: Contains the total number of violations for all devices.
•
Violating Devices: Contains the number of violating devices.
•
Severity level: For a compliance policy, this field displays the highest violation severity level among
the rules. For a rule, this field displays the violation severity level for the rule.
8.
Do one of the following:
{
To clasp the rules, click to the left of the compliance policy.