LEICA Q3 Digital Camera - Manual (Page 172)

VIDEO SETTINGS ▸ DATA MANAGEMENT 172
EDIT FILE NAMES
▸ Select Camera Settings in the main menu
▸ Select Edit File Name
• A keyboard submenu is displayed.
• The input line contains the factory setting “L” as the first letter
of the file name. Only this letter can be changed.
▸ Enter a letter of your choice (see p. 54)
▸ Confirm
Notes
• The change to a file name applies to all subsequent shots or until
a new change is made. The sequential number will not be affected;
but it will be reset when a new folder is created.
• During a reset to factory settings, the first letter will always be
reset to “L”.
• Lower case letters are unavailable.
CREATING A NEW FOLDER
▸ Select Camera Settings in the main menu
▸ Select Reset Image Numbering
• A relevant prompt is displayed.
▸ Confirm the creation of a new folder ( Yes ) or cancel the new
folder ( No )
Note
• The name part (first letter) of a new folder created this way remains
unchanged. The file numbers in that folder will start again at 0001.
DATA TRANSFER
Data can be conveniently transferred to mobile devices via Leica
FOTOS. Alternatively, a card reader or USB cable can be used for
the transfer.
ABOUT LEICA FOTOS
▸ See chapter “Leica FOTOS” (p. 228)
VIA USB CABLE OR “LEICA FOTOS CABLE”
The camera supports multiple data transfer options. A transfer mode
can be permanently selected or chosen every time a connection is
established.
Factory setting:
Apple MFi
▸ Select Camera Settings in the main menu
▸ Select USB mode
▸ Select the desired setting
( Mass Storage , PTP , Apple MFi , Select on connection )
– Apple MFi is used for the communication with iOS devices
(iPhone and iPad)
– PTP allows a data transfer to computers using MacOS or Windows
with PTP-capable programs, as well as tethering to Capture One
Pro and Lightroom Classic