LEICA Q3 Digital Camera - Manual (Page 65)

CAMERA BASIC SETTINGS ▸ POWER SAVE MODE (STANDBY MODE) 65
TIME ZONE
▸ Select Camera Settings in the main menu
▸ Select Date & Time
▸ Select Time Zone
▸ Select your time zone/current location
– The Greenwich Mean Time offset is shown on the left of the
line
– Major cities in the relevant time zones are shown on the right
DAYLIGHT SAVING TIME
▸ Select Camera Settings in the main menu
▸ Select Date & Time
▸ Select Daylight Saving Time
▸ Select On / Off
POWER SAVE MODE (STANDBY MODE)
The camera will switch to the power-saving standby mode after a
preset time to extend battery life if this function is activated.
The device has two power save levels.
– Standby mode is activated after 30 s/1 min/2 min/5 min/10 min
– Automatic LCD panel shutdown (see p. 68)
Factory setting:
2 min
▸ Select Camera Settings in the main menu
▸ Select Power Saving
▸ Select Auto Power Off
▸ Select the desired setting
( Off , 30 s , 1 min , 2 min , 5 min , 10 min )
Note
• The camera can be woken from standby mode at any time by
pressing the shutter button or by switching the main switch off
and on again.