LEICA Q3 Digital Camera - Manual (Page 227)

OTHER FUNCTIONS ▸ FIRMWARE UPDATES 227
UPDATING THE CAMERA FIRMWARE
▸ Preparation
▸ Select Camera Information in the main menu
▸ Select Firmware
▸ Select Start Update
• A prompt with information about the camera is displayed.
▸ Check the version information
▸ Select Yes
• The prompt Save profiles on SD Card? appears.
▸ Select Yes / No
• The update will start automatically.
• The status LED will flash during this process.
• Once the process has completed successfully, a relevant on-
screen message and prompt to restart the device will appear
on screen.
▸ Switch the camera off and on again
Note
• Date & time, as well as the preferred language will have to be
set up again after the restart. Relevant prompts will appear on
screen.
• These settings will be applied automatically if the update is loaded
via Leica FOTOS.