Siemens AC75 - Manual (Page 109)

AC75 AT Command Set
4.5 ATE
s
AC75_ATC_V01.002 Page 109 of 569 10/30/06
Confidential / Released
4.5 ATE Enable command echo
The
ATE
command determines whether or not the TA echoes characters received from TE during command
state.
Syntax
Parameter Description
[0] Echo mode off
1 (&F) Echo mode on
Notes
• In case of using the command without parameter,
<value>
is set to 0.
• When a Java application is running there is no echo available, existing settings are ignored and attempts to
change the settings are disregarded.
Exec Command
ATE
[
<value>
]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 - + + + + + + - + -
<value>
(num)(&W)(&V)