2 selecting spi mode, Selecting spi mode, Figure 19.4 – Siemens AC75 User Manual
Page 499: Spi modes selectable on spi, Figure 19.3, Delay time on i²c after read
Advertising
AC75 AT Command Set
19.8 AT^SSPI
s
AC75_ATC_V01.002
Page 499 of 569
10/30/06
Confidential / Released
19.8.2
Selecting SPI Mode
The figure shows the four types of SPI mode selectable by setting the appropriate hexadecimal value within the
parameter
Figure 19.3: Delay time on I²C after Read
Figure 19.4: SPI modes selectable on SPI
Advertising