Code 1, Code 2, Ac75 at command set – Siemens AC75 User Manual
Page 250
Advertising
AC75 AT Command Set
9.13 AT+CSSN
s
AC75_ATC_V01.002
Page 250 of 569
10/30/06
Confidential / Released
0
unconditional call forwarding is active
1
some of the conditional call forwardings are active
2
call has been forwarded
3
Waiting call is pending
0
The incoming call is a forwarded call.
5
Held call was terminated by other party
10
additional incoming call forwarded
Note
• URCs will be displayed only if the call concerned is a voice call, but some URCs will be displayed as well as
for data calls (like "
"=0).
<code 1>
(num)
<code 2>
(num)
Advertising