Siemens AC75 - Manual (Page 376)

AC75 AT Command Set
13.9 AT+CMSS
s
AC75_ATC_V01.002 Page 376 of 569 10/30/06
Confidential / Released
13.9 AT+CMSS Send short messages from storage
The write command sends message with location value
<index>
from message storage
<mem2>
to the network
(SMS-SUBMIT or SMS-COMMAND). If new recipient address
<da>
is given for SMS-SUBMIT, it shall be used
instead of the one stored with the message. Reference value
<mr>
is returned to the TE on successful message
delivery. Value can be used to identify message upon unsolicited delivery status report result code.
If the optional parameter
<da>
is given, the old status of the short message at
<index>
remains unchanged
(see
<stat>
).
Syntax
Test Command
AT+CMSS=?
Response(s)
OK
Write Command
If text mode (
AT+CMGF
=1):
AT+CMSS= <index>
[,
<da>
[,
<toda>
]]
Response(s)
+CMSS: <mr>
[,
<scts>
]
OK
If sending fails
ERROR
+CMS ERROR
Write Command
If PDU mode (
AT+CMGF
=0):
AT+CMSS= <index>
[,
<da>
[,
<toda>
]]
Response(s)
+CMSS: <mr>
[,
<ackpdu>
]
OK
If sending fails
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.05 + + + + + + + - - -